8 Best Cloning Machines For Plants 2020

As a gardener or farm owner, you would have heard about cloning machines. But the question remains; what are cloning machines? Well, we will be answering this question throughout the whole article and all you have to do is to read it. We will also be reviewing some of the best cloning machines here too. Just keep on reading and we assure you that it will be a great read.

What Is A Cloning Machine?

A cloning machine is a piece of automated gardening equipment that lets farm owners or horticulturists replicate their plants. You can find the shapes of clone machines to be round or square. Besides, the sizes of clone machines vary. However, these machines have something in common. These include a container, a water pump, spray nozzles or heads, an air pump and plastic containers for holding plants. Again, instead of plastic plant holders, manufacturers can opt for neoprene plant holders and it will still get the job done.

Sometimes, the cloning machine can have lots of cloning sites for replicating plants. So, to get the machine to do its job, the first thing to do is to get the cut plants and place them in the cloning sites. Next, the machine treats the cuttings with highly oxygenated water mist filled with nutrients while using the pump system. In conclusion, the machine helps to maximize the moisture and oxygen which clones need for root growth.

Reviews Of The Best Cloning Machines

There are lots of cloning machines to select from in the market but the problem lies in selecting the best ones. But do not worry because we have gone through this stress for you to put together the best ones yet. Read the reviews of our best cloning machines below:

1. Clone King 36 Site Aeroponic Cloning Machine

There are lots of cloning machines you can choose from but the Clone King 36 Aeroponic Cloning Machine stands out. This is due to so many reasons. But first, we found that the Clone King Company is a reputable one when it comes to cloning appliances. Also, among the numerous cloning machines we tested, this product is one of the few that has a 100% success rate. Besides, the 100% success rate is consistent. And we assure you that you will rarely find any time you will get below 100%.

Furthermore, this is one machine that is easy to assemble and get running. Even those that are using a cloning machine for the first time will get a hang of it in no time. Again, the machine has 36 cloning sites that make your cut plants ready for replanting between 4-10 weeks. Besides, within the first 3 weeks, you will notice the roots coming out. Durability was also put into consideration by the manufacturers of this machine. The device is strong and sturdy, so rest assured that it will last for a long time.

Moreover, this is an adaptable hydroponic system and it can run perfectly in any weather condition. Besides, you can also use it for any type of plant ranging from vegetables, flowers to herbs. Also, the bucket size is big enough to allow you to do your cloning tasks easily. It also gives the plants more room to flourish. Again, with a weight of 5lbs, this is one cloning machine that you can easily move around. Lest we forget, the cloning machine comes with a reservoir, spray manifold, submersible pump and 24 pieces of neoprene inserts and spares.

Pros

  • It boasts of a 100% success rate
  • It is easy to set up
  • Durable
  • The manufacturers included extra inserts in the package

Cons

  • The spray nozzle clogs up in no time

2. Hydrofarm OX20SYS Compact Recirculating Cloning Propagation System

The next on our list is the Hydrofarm OX20SYS oxyCLONE 20 Site Compact Recirculating Cloning Propagation System. This cloning machine is one of our favourites on the list and not without reason. Again, the Hydrofarm Company is one of the leading manufacturers when it comes to hydroponics. They use the best quality products to ensure that their products are safe for use. This is why their pumps are FDA food safe approved. Also, the plastics they use are BPA-free which means they do not take the health of their customers lightly.

Furthermore, the Oxyclone system uses Aqua Premium Water and air pumps. Besides, the pump won't leak or clog. Not only that, it promises maximum oxygenation and it draws its oxygen through a 4 inched diffuser. Worthy of note too is that this machine is one of the few that gives the plants dissolved oxygen. Also, because of its amazing temperature regulator, the machine produces a plant with stronger roots. Again, with 20 cloning sites, you are sure to clone a lot of plants at the same time.

Moreover, the manufacturers made the cloning sites from EVA foam. Rest assured that you won’t have any case of fungi and bacteria with the EVA foam. Besides, the foam is gentle and you can use it multiple times. Again, this machine is easy to set up and use as it comes with an instruction manual. However, we’ll advise that cloning amateurs should use machines with fewer cloning sites. Finally, it is compact and it weighs 15lb which makes it easy to carry around.

Pros

  • Compact
  • It is FDA food safe
  • It is made from BPA free plastic
  • It has an exceptional aeration system

Cons

  • None

3. Hydrofarm CK64060 Jump Start Heat mat, Tray

This is another product from the Hydrofarm Company. However, the Hydrofarm CK64060 Jump Start Heat Mat Tray is different from the last Hydrofarm product we reviewed. This one is not only suitable for stem cuttings; you can also use it for your seeds too. This is because it helps in improving germination. And it does this by making the area 10 to 20 degree Fahrenheit above room temperature. Also, it helps in controlling the humidity in the dome to help the plants flourish.

 Furthermore, it has a 72 cell insert house. This means you have more than enough space to clone your plants or put your seedlings. Again, we like how the hot mat keeps the soil wet. Because of this, you do not need to continuously wet the plants. Also, expect fast results because when we tested it with pepper seeds, seedlings began to sprout with 4 days. Also, unlike most hot mats, this product doesn't give off an offensive smell which is also a plus. 

Moreover, the tray is watertight which means you won’t spill any water while using it. Also, it is easy to use as the manufacturers included a detailed instruction in the package. They even included some growing tips to help the user achieve an amazing result. However, the machine has one simple flaw which is; the dome doesn’t sit well on the tray.

Pros

  • It helps to boost the germination process
  • It can accommodate up to 72 seeds and seedlings
  • Easy to use
  • The tray is watertight

Cons

  • The dome doesn’t sit well on the tray

4. TurboKlone T24D Cloning System, 24 Site

Looking for a cloning machine that will suit a hot weather condition perfectly? Look no further because the Turboklone T24D Cloning System is the ideal cloning machine for you. This is because the machine has a humidity dome that helps to ensure that the cut stems do not dry out. Not only that; it also has a patented TurboKlone fan system. The manufacturers designed it to prevent overheating of the plants in the machine. This, in turn, helps to keep the plants fresh.

Also, it has a submersible pump with the sole function of keeping the plants oxygenated. It also helps the plants to get the necessary nutrients that will make them flourish. Furthermore, it has 24 cloning sites which means you will be getting enough space to clone your plants. Again, this is another sturdy cloning machine as the manufacturers used durable plastic to make it. Besides, it is also easy to clean and maintain. However, we'll advise you to make use of filters to prevent the machine from clogging.

Another reason we like it is that it has a 100% success rate. Besides, expect fast results as your plants will be ready for replanting within 14 days. Also, with this machine, you have less chance of having bacteria buildup. However, it doesn’t come with a water heater. This means you need to buy one yourself if you need it.

Pros

  • It is ideal for hot weather conditions
  • It boasts of a 100% success rate
  • Durable
  • It promises fast results

Cons

  • It doesn’t come with a water heater

5. EZ Clone Classic 16 Slot Cutting System

The EZ Clone Classic 16 Slot Cutting System is another cloning machine we love. One of the reasons is because the manufacturers made it from 100% recycled materials. This makes it environmentally friendly and chemical resistant. Besides, it also has a robust High-Density Polyethylene (HDPE). Because of this, rest assured that this is one cloning machine that will stand the test of time. Also, this is one machine that is easy to use. The reason for this is because it comes with its user manual.

Moreover, it doesn’t need much maintenance. Also, it has 16 cloning sites that aid root development. Besides, you will begin to see your roots developing between 5 to 10 days. Furthermore, it comes with a manifold, some misters, a reservoir and a power pump. Again, it has lots of cords but you do not have to worry about leakages as each cord outlet is made to be leak-resistant. Also, the machine is easy to drain and the reason for this is because it has a recessed drain.

Worthy of note too is that it features a genuine aeroponic technology. Also, it is portable and lightweight which makes it easy to carry. Finally, you need to note that its lid is not very tight and you need to be careful while using it.

Pros

  • Compact
  • Easy to use
  • It delivers quick results
  • The manufacturers made it from 100% recycled materials

Cons

  • The lid is not tight enough

6. Powergrow Systems Deluxe 21 Site Bucket Cloner

The Powergrow Systems Deluxe 21 Site Bucket Cloner is one of the most unique cloning machines on this list. This is because it uses a combination of both the aeroponic and hydroponic systems. This allows for improved development of strong and healthy roots. Also, it has 21 cloning sites which are ideal for most cloners. Besides, it yields quick results and you are sure to witness the roots sprout under 2 weeks.

Furthermore, the machine is sturdy and this is because it is made from highly durable plastic. Also, it has suction feet that let it remain in place when you use it. We also like its pump and sprayers which ensure that the plants get the necessary nutrition to make them grow. Also, the nozzles move around at 360 degrees which means all the plants will get sprayed. Again, you can use it to clone different types of plants ranging from herbs to flowers.

Pros

  • Easy to assemble
  • It has powerful pumps and sprayers
  • It has a big reservoir
  • Durable

Cons

  • The neoprene collars are susceptible to leaking

7. Viagrow 602573081938 Clone Machine 24 Site

Are you interested in aesthetics? If yes, then the Viagrow 602573081938 Clone Machine System is the one for you. The reason for this is that it comes in different vibrant-coloured neoprene collars. The importance of these collars is that it helps you to identify your cut plants. Also, he misters, pumps and manifolds are made in such a way that they won't clog. Because of this, you can expect a more seamless operation when using this machine. Besides, the reason for this is that the pump has an internal filter.

Furthermore, it has a system that helps in regulating the system’s temperature. This is because, with the right temperature, the cuttings will flourish more. Also, this machine takes time to show results. And you will only get to see the root sprout at a minimum of 3 weeks. Again, you will need approximately 12 weeks to replant these cut stems. Also, it has a high success rate but does not expect a 100% success rate. We also like how it is easy to set up. Moreover, with a net weight of 3.9lbs, this is another machine you can easily move around.

We like this product but it is more expensive than most products in its functionality range. Not only that, its lid is not the most durable.

Pros

  • It promises a high success rate
  • Easy to set up
  • It comes with colourful collars for easy plant identification

Cons

  • It is pricey
  • The lid is not durable

8. Cloner Monster 500 Site ez Hydroponic Turbo Cloning Machine

The last but not the least is the Cloner Monster 500 Site ex Hydroponic Turbo Cloning Machine. Just like the last cloning machine we reviewed, it also has multiple-coloured collars. These collars allow you to easily identify your cut stems. Besides, the machine has 77 sites with each capable of holding 7 cuttings. So, in total, you can get up to 539 clones when you use this product.

Furthermore, it has an excellent reservoir of up to 25 gallons which helps in making the machine cooler. Also, it has a powerful pump that ensures the plants get more oxygen. Another reason we like the machine is that it uses sprayer jets which assures 100% strike rates. Again, it promises fast rooting rate which means you will begin to see favourable results in few days. Just like most of the machines on this list, this one is also easy to set up and use. Finally, the manufacturers made it from durable plastic.

Pros

  • You can clone up to 539 plants at once
  • Durable
  • Its reservoir size is 25 gallons
  • It uses sprayer jet

Cons

  • None

How To Choose The Best Cloning Machines?

Your needs should determine the type of cloning machine you get. So, we will be giving tips on how to select the best cloning machines you can get. Note that this selection process will take a bit of patience for you to get the best cloning machine you want.

Number Of Sites

The first question you ask yourself is “how many plants do you want to clone at once?” When you are certain about this number, then you can proceed to choose the machine that has the said number of sites for the number of plants you want to clone. So, for instance, if you want to clone 10 plants at once, you should get a cloning machine with 10 sites.

Bucket Size

Now, the next thing to consider is the bucket size of the cloning machine. It is advisable to go for cloning machines with bigger buckets. This will make it easier to move the plants from the bucket when the cloning process is complete. Besides, the size of the bucket also determines how big or small the plants you will put in the bucket will be. These buckets are usually measured in gallon which means the bigger the gallon, the bigger the bucket.

Type

There are two types of cloning machines you can choose and they are the Deep Water Culture and EBB and Flow Systems:

The Deep Water Culture cloning machine is the ideal cloning machine for amateurs or people that are just starting to clone plants. The way the tank is set up, it doesn't need a pump and this is because it has nutrients already stored in it. Also, the tank is oxygenated. Because of this, you do not have to worry about algae building up in the tank. Besides, you are also sure to record success with this type of machine.

The EBB & Flow System Cloning Machine is different from the DWC because it needs professionals to handle it. Also, this type of machine is for dry plants and we are confident you will get the right result while using this machine. Worthy of note that this type of cloning machine uses pumps and temperature regulators to get its desired results. Besides, this type of system has the highest success rate.

Expandable Kit

We wrote about ‘Number of sites’ before. And we said you should choose the cloning machine with the number of sites you need. However, there are cases where you might find yourself needing more cloning sites. This is why you need a cloning machine with an expandable kit. This will allow you to add extra devices to the machine to allow you to clone more plants in the future. However, note that this comes at an additional cost a lot of people might not want to bear.

Durability

It is one thing to choose a highly functional cloning machine but ensure the one you are choosing will stand the test of time too. Make sure the cloning machine is sturdy and not susceptible to cracking. Again, it is not about the machine’s frame alone. Make sure the pumps are not the type that will leak easily too.

Ease Of Assembly

When choosing a cloning machine, endeavour to go for the one that you can easily assemble or put together. Besides, some cloning machines come preassembled. Others only need you to go through the instruction manual to help you put them together. There are lots of reasons why we advise you to choose cloning machines that are easy to assemble. However, the most important reason is to avoid a situation where you will get frustrated with the machine even before starting to clone at all.

How A Cloning Machine Can Increase Success?

A cloning machine helps in increasing the success of gardeners in so many ways and some of them include:

  • It makes cloning easier for gardeners.
  • It lets gardeners multiply their quality plants in little time.

Conclusion

We hope you have learnt a lot from this article. We also hope we have been able to make your decision-making process easier. Rest assured that we performed our due diligence before compiling our list of best cloning machines. Because of this, regardless of the product, you settle for, among those in our list, you will 100% be going home a quality one. Finally, we included a buying guide for those that could not find any cloning machine among the ones we reviewed.

1 thought on “8 Best Cloning Machines For Plants 2020”

Leave a Comment